This guide is intended to be a supplemental quick reference to IFT training and is not intended to replace in person or virtual training.
Follow all Federal and Local FAA rules and regulations
Payload Setup:
Always confirm aircraft is off before installing or removing payloads.
-Sentera 65R: Confirm “CAM2_TYPE” is set to 5. If changes are made, reboot the vehicle for the new settings to take
effect.
-VIO: Before turning on the aircraft, in the HereLink Settings app, select Buttons > Load > down arrow > VIO > OK >
Save. Joystick > Scroll “W” Axis to CH# “6” > Save
-Level and center the gimbal, then power on the aircraft, then open IGC. Wait for the prompt to “Load Payload
Parameters" and tap OK. Allow the aircraft and payload to initialize.
Sony ILX- LR1: Before turning on the aircraft, in the HereLink Settings app, select Buttons > Load > down arrow > LR1 > OK > Save
Joystick > Scroll “W” Axis to CH# “15” > Save
-Level and center the gimbal, then power on the aircraft, then open IGC. Wait for the prompt to “Load Payload
Parameters" and tap OK. Allow the aircraft and payload to initialize.
-Manual Camera LR1 Lens Dimensions: Sensor Width: 35.70 mm Height: 23.80 mm, Image Width:9504 px Height: 6336 px, Focal Length: 35mm
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article